2019-20 Undergraduate Academic Catalog

EGCP-3010 Advanced Digital Logic Design –Sp 3 hours Advanced treatment of digital logical design techniques and practices with emphasis on rapid electronic prototyping and effective use of advanced computer-aided design tools; schematic, textual, and VHDL design entry; arithmetic circuits, advanced finite-state machines, and advanced controller implementations. Three lecture hours per week with periodic integrated laboratory; multiple projects and laboratory experiences including a class design contest usually involving a robot. Prerequisites: EGCP-1010 Digital Logic Design; CS-1210 C++ Programming; junior status or permission of instructor. (Fee: $100) EGCP-3210 Computer Architecture –Sp 3 hours Introduction to computer architecture with an emphasis on hardware, RISC vs. CISC, pipeline and vector processing, I/O, and memory hierarchy including caches. Students design and construct a small microprocessor using a logic simulator and then write an assembler for their processor. Prerequisites: EGCP-1010 Digital Logic Design; CS-1210 C++ Programming. EGCP-3920 Computer Engineering Internship 1–3 hours An opportunity for a computer engineering student to work closely with an industrial advisor. Specific attention is given to solving a particular problem(s) in that industry or firm. A faculty advisor assists in supervising and approving the internship, including assessing the number of credit hours. A final report (approximately seven pages per credit hour) describing the experience, including the problem and solution, is required. Must be arranged with a faculty sponsor and work supervisor before starting and cannot be used to satisfy elective credit requirements. Prerequisites: junior or senior engineering major status; faculty advisor’s permission. EGCP-3950 Topics in Computer Engineering –Fa, Sp 1–3 hours Selected topics in computer engineering at the 3000-level that will complement or extend existing 2000- and 3000-level courses or expose students to topics not taught in other courses; may be proposed by the engineering faculty or students. Prerequisite: instructor’s permission. EGCP-3980 1–3 hours Independent Study in Computer Engineering Opportunity to perform independent study or research in computer engineering and allied fields of application. A formal proposal for study must be approved by the faculty advisor before registering for this course. Up to three credit hours of engineering electives can be satisfied by an equivalent number of independent-study hours. Prerequisites: junior or senior engineering major status; faculty advisor’s permission. EGCP-3990 1–3 hours Project Design in Computer Engineering An elective course for students to get academic credit for extracurricular design work in computer engineering; project may be related to a design competition, ministry, industry, or personal interest. Cannot be used to satisfy engineering elective requirements. Prerequisite: instructor’s permission. EGCP-4110 Digital Signal Processing –Fa 3 hours Introduction to digital signal processing with emphasis on FIR and IIR filter design. Other topics include Z-transforms, Fourier Transforms, discrete-time systems, and finite word-length effects. The implementation of filters in embedded systems is introduced. Design project required. Crosslisted with EGEE. Prerequisites: EGEE-3110 Linear Systems; CS-1210 C++ Programming. EGCP-4210 Advanced Computer Architecture –Fa 3 hours Advanced study of computer architecture with an emphasis on performance, performance metrics, benchmarks, integer and floating point concepts, data-path and control, super-scalar processing and pipelining, memory hierarchy, I/O and peripherals, vector, array and parallel processors, and multiprocessors. Prerequisites: EGCP-3210 Computer Architecture. (Fee: $100) EGCP-4250 CMOS VLSI Design –Sp 3 hours Introduction to CMOS VLSI design with emphasis on circuit analysis, modeling, mask layout, simulation, and design verification; both theoretical concepts and CAD tools are used together for circuit design and verification. Three lecture hours per week with integrated laboratory. Prerequisite: EGEE-3210 Electronics I. EGCP-4310 Computer Networks –Fa 3 hours This course is an introduction to computer networking. The course will present the layered network architecture of the internet and examine the services and functions that each layer performs. The wellknown protocols of each layer will be explored in-depth through written homework, programming assignments, and packet-capture labs (using Wireshark, for example). Important fundamental networking topics will be emphasized such as packet switching, addressing, performance measurement, reliable data transfer, and routing. Additional topics such as peer-to-peer networking, wireless and mobile networking, and the history of the internet will also be addressed. Prerequisites: CS-2210 Data Structures Using Java; Corequisite: CS-3310 Operating Systems. (Fee: $50) EGCP-4410 Parallel Computing –Fa 3 hours Introduction to the exploitation of parallelism to solve computationally intensive problems; explores schemes for achieving parallelism, architectures required for parallel computing, performance analysis, and parallel algorithm design; uses common standards for message passing (e.g., MPI), local clusters and remote supercomputer systems. Crosslisted as CS and EGCP. Prerequisites: CS-3310 Operating Systems. Corequisite: CS-3410 Algorithms; permission of instructor. (Fee: $50) (even years) EGCP-4810 4 hours Computer Engineering Senior Design I –Fa Design and development of electronic products to meet specific requirements. Introduction to computer system design, power supply design, hardware-software co-design, software engineering, system performance trade-offs, electronic design tools, prototype methods, estimating and managing time and cost constraints, and project management. Student teams prepare a project proposal, design and prototype a microprocessor-based system or sub-system, use computerized design tools, submit weekly progress reports, and conduct design reviews. Three lecture hours and one two-hour laboratory per week. Prerequisite: EGEE-3210 Electronics I, CS-3410 Algorithms, CS-3310 Operating Systems, and Senior status in computer engineering Corequisite: EGCP-4210 Advanced Computer Architecture. (Fee: $100) EGCP-4820 4 hours Computer Engineering Senior Design II –Sp Continuation of EGCP-4810 Computer Engineering Senior Design I. Student teams will complete their capstone project, submit weekly progress reports, prepare a formal final report, and make a formal design review presentation. Prerequisite: EGCP- 4810 Computer Engineering Senior Design I. (Fee: $100) EGCP-4950 1–3 hours Advanced Topics in Computer Engineering Selected topics in computer engineering at the 4000-level that expand the depth of existing 3000- and 4000-level courses or expose the students to advanced concepts not taught in other courses. Topics may be proposed by the engineering faculty or students. Prerequisite: instructor’s permission. 2019–20 Undergraduate Academic Catalog Page 279 Course Descriptions EGCP-3010 – EGCP-4950 ENGINEERING AND COMPUTER SCIENCE

RkJQdWJsaXNoZXIy MTM4ODY=