2013-2014 Undergraduate Academic Catalog

EGGN-3960 Competition Project –Sp 0 hours Engineering juniors on a department of engineering intercollegiate design competition may use this course to provide on their transcript a record of their participation throughout the year. The name of the competition will be designated. EGGN-4010 Senior Seminar –Fa 0 hours Required weekly meeting of senior engineering majors to discuss the transition into the professional work environment. Prerequisite: senior status in engineering or computer science. (Fee: $35) EGGN-4960 Competition Project –Sp 0 hours Engineering seniors on a department of engineering intercollegiate design competition may use this course to provide on their transcript a record of their participation throughout the year. The name of the competition will be designated. Mechanical Engineering (EGME) EGME-1810 Engineering Graphics –Fa 1 hour Introduction to basic techniques of sketching, drawing, dimensioning, multiple views, sectioning, multi-view projections, and pictorial views. Introduction to commercial software for three- dimensional solid modeling and preparing engineering drawings. (Fee: $25) EGME-2050 Computational Methods –Sp 4 hours Introduction to computer programming and the numerical methods for solving roots of equations, simultaneous linear algebraic equations, ordinary differential equations, integration, introduction to finite-difference approximations, and least-squares curve fits. Pre- or Corequisites: MATH-2710 Calculus III; MATH- 2740 Differential Equations. EGME-2310 Manufacturing and Finance –Fa 3 hours Introduction to the fundamentals of manufacturing and contemporary materials processing, molding, casting, forming, machining, inspection techniques, and quality assurance. Applications to the time value of money, break-even and payback analysis, and economic analysis of engineering alternatives. Prerequisite: EGME-2410 Properties of Engineering Materials. (Fee: $55) EGME-2410 Properties of Engineering Materials –Fa 4 hours Introduction to the properties of metallic, ceramic, polymeric, and composite materials; plastic deformation, strengthening, fracture, fatigue, corrosion, diffusion, equilibrium and nonequilibrium processes, phase diagrams, electrical and magnetic properties, and application to materials selection. Three lecture hours and one two-hour laboratory per week. Prerequisite: EGME-2530 Statics and Mechanics of Materials. (Fee: $100) EGME-2510 Statics –Fa 3 hours Introduction to analyzing forces in isolated and connected rigid- body systems; vector analysis, forces, moments, resultants, two- and three-dimensional equilibrium, centroids, moment of inertia, friction, trusses, frames, and machines. Design project required. Prerequisites: EGME-1810 Engineering Graphics; PHYS-2110 General Physics I; MATH-1720 Analytical Geometry and Calculus II. (Fee: $10) EGME-2530 Statics and Mechanics of Materials –Fa 5 hours Introduction to analyzing forces in isolated and connected rigid- body systems; vector analysis, forces, moments, resultants, two- and three-dimensional equilibrium, centroids, distributed loading, moment of inertia, friction, trusses, frames, and machines. Introduction to the theoretical and experimental analysis of deformable bodies subject to applied loads; normal and shear stress and strain, strain energy, torsion, stresses in beams, deflection of beams, combined stress, stress transformation, failure theories, and buckling of columns. Design project required. Prerequisites: EGME-1810 Engineering Graphics; PHYS-2110 General Physics I; MATH-1720 Calculus II. (Fee: $25) EGME-2630 Dynamics –Sp 3 hours Introduction to kinematic and kinetic analysis of particles, systems of particles, and rigid bodies; position, velocity, acceleration, non-rotating and rotating frames of reference, Newton’s laws, work, energy, impulse, momentum, conservative and non-conservative systems, and vibration of single-degree-of- freedom systems. Design project required. Prerequisite: EGME- 2510 Statics or EGME-2530 Statics and Mechanics of Materials. Pre- or Corequisite: MATH-2740 Differential Equations. (Fee: $10) EGME-3010 2 hours Mechanical Engineering Laboratory I–Fa Experiments using the wind tunnel, engine test cell, testing machines in the mechanics laboratory, vibrations laboratory, fluids laboratory, refrigeration laboratory, and heat transfer laboratory are conducted. Students measure mechanical phenomena such as acceleration, force, pressure, temperature, strain, fluid flow, viscosity, and heat transfer using transducers, instrumentation, and PC-based data acquisition. Students design some of the experiments. Two 2-hour laboratories per week. Prerequisites: EGME-2630 Dynamics; EGEE-2050 Circuits and Instrumentation. Corequisites: EGME-3110 Thermodynamics; EGME-3210 Fluid Mechanics. (Fee: $100) EGME-3020 2 hours Mechanical Engineering Laboratory II–Sp Continuation of EGME-3010. Two two-hour laboratories per week. Prerequisite: EGME-3010 Mechanical Engineering Laboratory I. Corequisite: EGME-3150 Heat Transfer. (Fee: $100) EGME-3050 3 hours Introduction to Finite Element Analysis–Sp Introduction to basic components of the finite element method including element selection, shape functions, strain-displacement and stress-strain relations, formulation of the stiffness matrix for 1-D, 2-D, and 3-D elements, linear strain and isoparametric formulations, application of boundary conditions, and interpretation of results; application to 2-D and 3-D problems and experience using a commercial code. Prerequisites: EGME-2050 Computational Methods; EGME-2530 Statics and Mechanics of Materials. (Fee: $25) EGME-3110 Thermodynamics –Fa 5 hours Introduction to engineering thermodynamics, properties of pure substances, work, heat, first and second laws of thermodynamics, energy, enthalpy, and entropy. Specific application to power, refrigeration cycles, and combustion processes. Prerequisites: CHEM-1050 Chemistry for Engineers; MATH-2710 Calculus III. EGME-3130 Internal Combustion Engines –Sp 3 hours Introduction to internal combustion engines, fuel-air cycles, engine simulation, emissions, engine performance and alternative fuels. Prerequisites: EGME-2630 Dynamics; EGME-3110 Thermodynamics. EGME-3150 Heat Transfer –Sp 3 hours Introduction to conduction, convection, and radiation heat transfer in one and two dimensions; free and forced convection, analytical and computational techniques applied to Fourier’s Law of conduction, Newton’s Law of cooling, and Stefan-Boltzman’s Law of thermal radiation. A heat exchanger design project is required. Prerequisites: EGME-3110 Thermodynamics; EGME- 3210 Fluid Mechanics. Corequisite: EGME-2050 Computational Methods. EGME-3170 Thermal Systems –Sp 2 hours Introduction to engineering thermodynamics, properties of pure substances, work, heat, enthalpy, and first law of thermodynamics. Introduction to conduction and convection modes of heat transfer. Prerequisites: CHEM-1050 Chemistry for Engineers; MATH-2740 Differential Equations. Course Descriptions | EGME-3610 – EGME-4610 Page 221 2013–14 Undergraduate Academic Catalog Course Descriptions EGGN-3960 – EGME-3170