2014-2015 Undergraduate Academic Catalog

EGME-3010 2 hours Mechanical Engineering Laboratory I –Fa Experiments using the wind tunnel, engine test cell, testing machines in the mechanics laboratory, vibrations laboratory, fluids laboratory, refrigeration laboratory, and heat transfer laboratory are conducted. Students measure mechanical phenomena such as acceleration, force, pressure, temperature, strain, fluid flow, viscosity, and heat transfer using transducers, instrumentation, and PC-based data acquisition. Students design some of the experiments. Two 2-hour laboratories per week. Prerequisites: EGME-2630 Dynamics; EGEE-2050 Circuits and Instrumentation. Corequisites: EGME-3110 Thermodynamics; EGME-3210 Fluid Mechanics. (Fee: $100) EGME-3020 2 hours Mechanical Engineering Laboratory II –Sp Continuation of EGME-3010. Two two-hour laboratories per week. Prerequisite: EGME-3010 Mechanical Engineering Laboratory I. Corequisite: EGME-3150 Heat Transfer. (Fee: $100) EGME-3050 3 hours Introduction to Finite Element Analysis –Sp Introduction to basic components of the finite element method including element selection, shape functions, strain-displacement and stress-strain relations, formulation of the stiffness matrix for 1-D, 2-D, and 3-D elements, linear strain and isoparametric formulations, application of boundary conditions, and interpretation of results; application to 2-D and 3-D problems and experience using a commercial code. Prerequisites: EGME-2050 Computational Methods; EGME-2530 Statics and Mechanics of Materials. (Fee: $25) EGME-3110 Thermodynamics –Fa 5 hours Introduction to engineering thermodynamics, properties of pure substances, work, heat, first and second laws of thermodynamics, energy, enthalpy, and entropy. Specific application to power, refrigeration cycles, and combustion processes. Prerequisites: CHEM-1050 Chemistry for Engineers; MATH-2710 Calculus III. EGME-3130 Internal Combustion Engines –Sp 3 hours Introduction to internal combustion engines, fuel-air cycles, engine simulation, emissions, engine performance and alternative fuels. Prerequisites: EGME-2630 Dynamics; EGME-3110 Thermodynamics. EGME-3150 Heat Transfer –Sp 3 hours Introduction to conduction, convection, and radiation heat transfer in one and two dimensions; free and forced convection, analytical and computational techniques applied to Fourier’s Law of conduction, Newton’s Law of cooling, and Stefan-Boltzman’s Law of thermal radiation. A heat exchanger design project is required. Prerequisites: EGME-3110 Thermodynamics; EGME- 3210 Fluid Mechanics. Corequisite: EGME-2050 Computational Methods. EGME-3170 Thermal Systems –Sp 2 hours Introduction to engineering thermodynamics, properties of pure substances, work, heat, enthalpy, and first law of thermodynamics. Introduction to conduction and convection modes of heat transfer. Prerequisites: CHEM-1050 Chemistry for Engineers; MATH-2740 Differential Equations. EGME-3210 Fluid Mechanics –Fa 3 hours Introduction to fluid properties, fluid statics, and the concepts, definitions, and basic equations for subsonic fluid dynamics; Navier-Stokes equation, viscous and invisid fluid flows, potential flow analysis, boundary layers, laminar and turbulent flows, analytical and computational solutions, vector fields, and finite- integral-control-volume method. Prerequisites: MATH-2710 Calculus III; MATH-2740 Differential Equations. EGME-3430 Principles of Physical Metallurgy –Sp 3 hours Introduction to the physical and mechanical properties of metals and alloys; crystal structure, phase equilibria, defects, strengthening mechanisms, and kinetics of reactions. Prerequisite: EGME-2410 Properties of Engineering Materials. EGME-3450 Plastic and Composite Materials –Sp 2 hours Introduction to the properties and processing of plastics, resins, and adhesives; rheology, creep-deformation history, and injection molding. Fiber-reinforced, carbon-carbon, and metal-matrix composites are analyzed for strength, anisotropy, and applicability. Prerequisite: EGME-2410 Properties of Engineering Materials. EGME-3610 3 hours Kinematics and Design of Machines –Sp Introduction to the analysis and synthesis of motion in planar mechanisms and linkages; velocity and acceleration analysis, cam design, gears, simple and compound gear trains, computer solution and simulation. Design project required. Prerequisite: EGME-2630 Dynamics. (Fee: $40) EGME-3850 Mechanical Design –Sp 3 hours Further development of load determination, stress, strain, deflection and failure theories; integration of an iterative problem solver in the design process; and analysis of fatigue failure. Introduction to the design of mechanical components including shafts, keys, couplings, bearings, gears, springs, and fasteners. Prerequisite: EGME-2410 Properties of Engineering Materials. Corequisites: EGME-3020 Mechanical Engineering Laboratory II; EGME-3610 Kinematics and Design of Machines. (Fee: $25) EGME-3920 Mechanical Engineering Internship 1–3 hours An opportunity for a mechanical engineering student to work closely with an industrial advisor. Specific attention is given to solving a particular problem(s) in that industry or firm. A faculty advisor assists in supervising and approving the internship, including assessing the number of credit hours. A final report (approximately seven pages per credit hour) describing the experience, including the problem and solution, is required. Must be arranged with faculty sponsor and work supervisor before starting and cannot be used to satisfy elective credit requirements. Prerequisites: junior or senior engineering major status; faculty advisor’s permission. EGME-3950 1–3 hours Topics in Mechanical Engineering –Fa, Sp Selected topics in mechanical engineering at the 3000-level that will compliment or extend present 2000- or 3000-level courses or expose students to topics not taught in other courses; may be proposed by the engineering faculty or students. Prerequisite: instructor’s permission. EGME-3980 1–3 hours Independent Study in Mechanical Engineering Opportunity to perform independent study or research in the various branches of engineering and allied fields of application. A formal proposal for study must be approved by the faculty advisor before registering for this course. Up to three credit hours of engineering electives can be satisfied by an equivalent number of hours of independent study. Prerequisites: junior or senior engineering major status; faculty advisor’s permission. EGME-3990 1–3 hours Project Design in Mechanical Engineering An elective course for students to get academic credit for extracurricular design work in mechanical engineering; project may be related to a design competition, ministry, industry, or personal interest. Cannot be used to satisfy engineering elective requirements. Prerequisite: instructor’s permission. Course Descriptions | EMTC-2350 – EMTC-3355 Page 227 2014–15 Undergraduate Academic Catalog Course Descriptions EGME-3010 – EGME-3990